In the following article, let us discuss “ How To Get Scratches Out Of Stainless Steel”. Stainless steel is well-known for its sleek look and durability. It is actually an excellent choice for cookware, kitchen appliances, sinks, fixtures. And other items in your house and workplace. Basically, whether it’s a microwave, dishwasher or refrigerator, stainless steel can be easily scratched.
You don’t need to live with scuffed up steel forever, also! You will have to follow these simple steps to remove scratches or scrapes on your stainless-steel appliances. Here is one important thing to keep in mind always: Make sure to only apply these techniques on stainless steel. Which usually does not have a protective clear coat or synthetic surface applied.
Basically to remove fine scratches, cleaners such as Comet, Revere Stainless Steel. And Copper Cleaner can also be used to gently buff stainless steel. If you are unable to find any of those, appliance manufacturers basically make their own cleaners. That are very easy to find at home improvement stores. Some minor scratches can also be concealed by using a stainless-steel polish. Unfortunately, you must reapply the polish on a frequent basis to keep your products looking great always. But this can be the best method for appliances which are covered with protective film.
Does toothpaste remove scratches from stainless steel?
You can also use a non-abrasive compound such as Bar Keeper’s Friend or Revere Stainless Steel and Copper Cleaner. (In a pinch, you can basically use whitening toothpaste).
- And if you’re using a powdered stainless steel scratch removal compound. Then you will need to add enough water—a few drops of it at a time—basically to create a paste roughly the consistency of toothpaste. If your compound of choice is cream-based, then you will have to proceed to the next step.
- You will have to apply a small amount of the scratch remover compound to a microfiber cloth. And then you will need to rub it back very gently and forth over the scratch. Which is basically working in the direction of the metal’s grain. And then you will need to continue until the scratch buffs out.
- You will need to gently wipe the surface by using a fresh, barely damp microfiber cloth to remove any compound residue. Then you will have to dry with another fresh microfiber cloth. And after that you will just need to repeat Steps 2 and 3 if needed to completely remove scratches from your stainless steel surfaces.
How can you easily remove scratches from a stainless steel refrigerator?
Stainless steel appliances basically require regular cleaning and management to preserve their appearance. And also the material itself is more durable and resistant to rust, stainless steel is not impervious and is at risk of scratching. You can also help to care for your appliances and then keep them looking their best. With tips on how to remove scratches from stainless steel appliances.
Taking a Close Look at Your Appliances
Before starting, you will need to make sure the finish is actually stainless steel and not simulated or clear coated. There are a lot of number of ways to test the surface, which is basically including:
- Fingerprints are easily visible
- Brushed finish
You will just have to clean the affected area before starting. By using white vinegar which is basically followed by a clear water rinse. Or a useful cleaning product basically designed for use on stainless steel. You will need to use a clean cloth and wipe in the direction of the grain to prevent any damage.
Here are some Important Tips for Removing Scratches From Stainless Steel Appliances
You will need:
- Clean, lint-free cloths
- Soft-bristled toothbrush
- Non-abrasive commercial cleanser, liquid or powder
- Whitening toothpaste
- Wet/dry sandpaper in various grits
- Sanding block
- Stainless steel polish
It basically depends on the severity and number of scratches, you may also need to try one or more of the following methods to get the desired results.
Removing Fine Scratches in Stainless Steel
Light scratches are very easy to remove and can be easily buffed out by sing a non-abrasive cleanser:
- If you are using a powder, you will have to mix with a little water to form a paste.
- Then, you will have to dampen your cloth and then apply a small amount of liquid cleaner or paste. And then simply rub the solution firmly back and forth over the scratch, and then follow the grain.
- You will have to use a clean, damp cloth to wipe away the cleanser and then you will see if the scratch is gone.
- After that, you will need to repeat the process until satisfied and then simply apply a light coat of stainless steel polish or olive oil.
If the non-abrasive cleanser doesn’t work then you can also try the following methods by using a whitening toothpaste which is mildly abrasive:
- You will have to apply the toothpaste to the toothbrush, and then you will need to work the solution back and forth on the scratch and follow the grain.
- You will have to use a clean, damp cloth to wipe away the toothpaste and then you will be able to see if the scratch is gone.
- After that, you will need to repeat the process until satisfied and then you will have to apply a light coat of stainless steel polish or olive oil.
How do you get deep scratches out of stainless steel?
Deeper scratches will basically meet your match: Sandpaper. And a piece of wet fine-grit sandpaper can also be used to remove deeper scratches. But you will need to make sure to always keep it wet, and then follow up with a rubbing compound.
You will have to start with the scratch and then simply blend it in. Follow the direction of the grain and then start sanding in one direction only, and follow the brushed pattern. Don’t need to sand back and forth and never sand against the grain. If you actually need to use a coarse-grit paper to remove some deep scratches, you will just need to follow up with a finer grit, and then finally a rubbing compound.
The sanding technique basically works on plain (uncoated) stainless steel panels only: Don’t need to try it on simulated stainless steel or stainless panels by using a fingerprint-resistant clear coat.
- First of all, you will need to wet the sandpaper and then keep it wet throughout the process.
- You will just have to dampen the affected area and keep it wet throughout the process.
- After that, you will just need to apply light pressure and sand the scratch, moving back and forth following the grain.
- If you will find after a few minutes the scratch is still there, you can also try a slightly coarse grit of sandpaper.
- And when the scratch is gone then you can use a finer grit to buff the affected area and simply blend with the rest of the finish.
- You will just need to wipe the area by using a clean wet cloth in the direction of the grain.
- Then, you will just have to dry with a soft towel.
- And then you will have to apply a light coat of stainless steel polish or olive oil.