Types of Garage Door Springs-Everything You Should Know

If your garage door isn’t working properly, it’s likely because of an issue with the springs. In this blog post, we’ll tell you everything you need to know about the different types of garage door springs, so you can get your door working again in no time.

Torsion Garage Door Springs

Torsion garage door springs are the most common type of springs used on garage doors. They are wound around a shaft on the header of the door and provide the lifting power needed to open and close the door. The springs are anchored to the header with brackets and the door is balanced on the springs.

If one of the springs breaks, the door will become unbalanced and will be very difficult to open and close. It is important to have a professional replace the springs as soon as possible to avoid any further damage to the door or injury to yourself.

Extension Garage Door Springs

Extension springs are the most common type of garage door spring. They are mounted on either side of the door and stretch as the door lowers. These springs are relatively easy to replace and are not as dangerous as torsion springs.

FAQs

Q: What are the different types of garage door springs?

A: There are two main types of garage door springs: torsion springs and extension springs. Torsion springs are located above the door, while extension springs are located below.

Q: How long do garage door springs last?

A: The average lifespan of a garage door spring is 10,000 cycles. However, this can vary depending on the quality of the spring and the amount of use it gets.

See also  Windshield Wiper Fluid Not Coming Out: Causes and Fixes

Q: How much do garage door springs cost?

A: The cost of garage door springs can vary depending on the type, size, and quality. Torsion springs typically cost between $50 and $100, while extension springs can cost between $100 and $200.

Types of Garage Door Springs-Everything You Should Know

Must Read

1.Torsion Springs
2.Extension Springs
3.Tension Springs
4.Coil Springs
5.Leaf Springs

1. Torsion springs are the most common type of garage door spring. They are wound springs that help balance the garage door and make it easy to open and close.

2. Extension springs are located above the door opening and stretch as the door opens to help raise the door.

3. Tension springs are located on either side of the door and help to counterbalance the weight of the door.

4. Coil springs are located around the door track and help to lift the door as it opens.

5. Leaf springs are located under the door and help to support the door as it opens and closes.

Conclusion

Thanks for reading! We hope you found this article helpful. garage door springs are an essential part of your garage door system and it’s important to know how they work and when they need to be replaced. Be sure to check out our other articles on garage doors and garage door repair for more information.

Leave a Comment