P0842 Error Code – Symptoms, Diagnosis & Fixes

If your car is displaying the P0842 error code, it means that there is an issue with the transmission fluid pressure sensor/switch “A” circuit. This can be caused by a variety of factors, including a faulty sensor, a short in the wiring, or a problem with the transmission itself.

In most cases, the P0842 error code is a relatively easy fix. Start by checking the transmission fluid level and topping it off if necessary. If that doesn’t fix the problem, then the next step is to check the sensor and wiring for any signs of damage. If everything looks good, then the most likely culprit is the transmission itself.

If you’re experiencing the P0842 error code, don’t panic. In most cases, it’s a relatively easy problem to diagnose and fix.

Code P0842 Definition

The P0842 error code is a relatively common one that can occur on a variety of vehicles. It stands for “Powertrain Control Module (PCM) Relay Sense Circuit Low Voltage.” This code is typically associated with a faulty PCM relay, but it can also be caused by other issues.

There are a few symptoms that may be associated with the P0842 code. These can include the engine stalling or hesitating, the check engine light coming on, and the engine not starting.

If you suspect that you have this code, the first thing you should do is check the PCM relay. If it is faulty, it will need to be replaced. If the relay is not the issue, then it is likely that there is a problem with the wiring or another component in the circuit.

In order to diagnose and fix the problem, a qualified technician will need to hook up a scanner to the vehicle’s computer and run some tests. They may also need to visually inspect the wiring to look for any damage or loose connections. Once the problem is located, it can be repaired and the code should be cleared.

See also  Signs and Symptoms of Bad spark Plug Wires: Tests and Fixes

What Does P0842 Mean?

The P0842 error code indicates that there is a problem with the transmission fluid pressure sensor, specifically with the circuit that controls it. This can be caused by a number of things, including a faulty sensor, a short in the wiring, or a problem with the transmission itself.

There are a few things that you can do to try and fix the P0842 error code, including checking the transmission fluid level and checking the wiring for any shorts. If these things don’t work, then you may need to take your car to a mechanic or a dealership to have it looked at.

What Are the Symptoms of Code P0842?

The most common symptom of Code P0842 is the illumination of the Check Engine Light on the vehicle’s dash. Other symptoms may include a loss of power while driving, and the vehicle may feel as though it is dragging.

How Serious Is Code P0842?

When your check engine light illuminates, it’s important to take notice and determine the cause. The severity of the code P0842 will vary depending on the severity of the underlying problem. In some cases, the check engine light may come on and then go off after a short period of time. This could indicate a minor problem that doesn’t require immediate attention. However, if the light remains on, it’s important to have the car checked out as soon as possible.

If the problem is severe, it could cause the car to stall or even cause damage to the engine. Therefore, it’s important to take the code P0842 seriously and have the car checked out by a mechanic as soon as possible.

How to Diagnose Code P0842?

If your car is displaying the P0842 error code, it means that there is a problem with the transmission fluid pressure sensor/switch “A” circuit. The first step in diagnosing this code is to check the transmission fluid level and condition. If the fluid is low or dirty, it will need to be replaced. Next, check the transmission fluid pressure sensor/switch for signs of damage or corrosion. If the sensor is damaged, it will need to be replaced. If the sensor is corroded, it will need to be cleaned or replaced. Finally, check the wiring and connectors for the transmission fluid pressure sensor/switch for signs of damage or corrosion. If the wiring is damaged, it will need to be replaced. If the connectors are corroded, they will need to be cleaned or replaced.

See also  Reasons For A Car Key Stuck In Ignition And How To Remove It

How do you fix P0842?

P0842 is a transmission fluid pressure (TFP) switch circuit failure. The TFP switch is used to determine when the transmission is in the proper gear and when to shift. When the TFP switch fails, it can cause the transmission to shift improperly or not at all. There are a few ways to fix a P0842 error code.

One way to fix a P0842 error code is to check the transmission fluid level and add more fluid if needed. Another way to fix a P0842 error code is to check the TFP switch for damage and replace it if necessary. Finally, if the transmission is not shifting properly, it may need to be rebuilt or replaced.

Code P0842 Common Diagnosis Mistakes

P0842 is a relatively common error code that can be caused by a number of different things. However, there are a few common diagnosis mistakes that are often made when troubleshooting this code.

One of the most common mistakes is assuming that the code is caused by a problem with the transmission fluid level or quality. While this can sometimes be the case, it is not always the root cause of the code. In many cases, the code is actually caused by a problem with the transmission pressure sensor or the wiring to it.

Another common mistake is assuming that the code is always caused by a mechanical problem within the transmission. While this can sometimes be the case, it is not always the root cause of the code. In many cases, the code is actually caused by an electrical problem, such as a problem with the transmission pressure sensor or the wiring to it.

See also  How Hot Does A Car Exhaust Get? (Muffler & Manifold)

If you are troubleshooting this code, be sure to check all potential causes before making any assumptions. By taking the time to properly diagnose the code, you can save yourself a lot of time and frustration.

P0842 Error Code – Symptoms, Diagnosis & Fixes

Must Read

1. If your car is displaying the P0842 error code, it means that the transmission fluid pressure sensor/switch “A” circuit is malfunctioning.

2. The most likely cause of this error code is a faulty transmission fluid pressure sensor or switch.

3. You can try to fix this problem yourself by replacing the transmission fluid pressure sensor or switch.

4. If you are not comfortable replacing the sensor or switch yourself, then you should take your car to a mechanic or a dealership for help.

5. Once the new sensor or switch is installed, you should clear the error code from your car’s computer system.

Conclusion

Thanks for reading our blog post on the P0842 error code. We hope you found the information helpful and that it will lead you to a successful diagnosis and fix.

Leave a Comment