How To Unclog A Tub

The first thing you do after rising from your bed is to move towards your bathroom. A person gets ready for a refreshing shower to start the day off. The water gets sneaked in over your ankles as you start shampooing your hair. After this, you should clean the bathtub drain before it can be used for the next shower.

The first method you can use to clean the bathtub drain can be a chemical drain. But this is considered a harmful way to unclog bathtub drain for several reasons. If you use harsh chemicals, it will lead to trouble by damaging your pipes. Also, when you pour toxic substances and chemicals down the drain, it pollutes the municipal water supply.

Therefore, to avoid damage, it is better to use natural methods and home remedies.

How do you unclog a bathtub fast?

There are a few options to unclog bathtub drain without chemicals and thus preventing damage.

Remove easy-to-reach gunk- You can start unclogging bathtub by removing the stopper. Insert a screwdriver beneath the lid of your tub’s pop-up drain stopper, loosen the screw, and remove the stopper. You will find the accumulated debris and hair when you lift it out. You should use needle-nose pliers to bend a wire coat hanger into a hook if you are too scared to remove the filth by hand. Therefore, to remove any such filth and stuff from the drain, you may use the tool for unclogging bath drain.

Sometimes, the drain will not be foul, and therefore it will work fine by just cleaning and removing these parts. You can send a large quantity of hot water down the drain to clean it. If the drain gets clean, the water will clear pass through it. Or else, the drain will back up, which means it has a blockage further down. So, it is advisable to use home remedies to unclog the bathroom drain.

See also  The Easiest way on How to Remove a Stuck Oil Filter

Pour boiling water down the drain-

Take a large pot and boil water in it and pour it slowly down the bathtub drain. The primary purpose of pouring the hot water is to dissolve the soap scum and the hair buildup. It can also be done with the help of pouring a cup of baking soda with one cup of vinegar.

Use a Plunger-

You can clean the drain with a plunger after removing the stopper. To begin, establish a vacuum by plugging the overflow drain. Remove the cover plate below the bathtub faucet and cover the opening with a washcloth or hand towel to prevent air from escaping.

After this step, fill the tub with hot water up to a certain level and set the plunger over the drain. To get things moving, apply several thrusting motions.

Use a plumber’s snake-

If the blockage persists despite your efforts with a plunger, it’s time to deploy heavy artillery. A plumber’s snake, also known as an auger, is a long, flexible cable with a coiled spring on one end and a hand crank on the other. For the job, you may either buy or rent one.

Place the cable in the crank and spin the wheel until you have reached the blockage. To help the cable stuck in the blockage, you can either push or pull it. Spin the crank in another direction if you need to draw the cable out. If the coiled spring is empty, try putting it in the overflow drain to remove any obstructions that have accumulated beyond the drain trap.

See also  168 Vs.194 Bulb – What are The Differences?

How To Unclog A Tub

What home remedy can I use to unclog a Bathtub?

Take one cup of baking soda, one cup of vinegar, and salt. You need to ensure no water in the tub if you need more power. Dump the baking soda into the drain, followed by salt and then vinegar.

How do you unclog a tub with standing water?

There are a lot of times when we get a complaint about clogging with too much hair. It is said that using chemical cleaners might help you unclog tub drain problems, but it imposes a significant risk of harming plumbing pipes.

Items needed-

  • Boiled water
  • Half cup of baking soda
  • One cup of vinegar
  • Timer

Steps-

The first step you need to do is to make sure that your bathtub is drained out. You can use buckets and cups to remove standing water from the tub, and then you may proceed to take the following steps-

When you have prepared everything, you may take the following steps-

  • Pour one cup of water down the drain.
  • Then, mix half a cup of baking soda down the drain.
  • You can mix vinegar in the next cup of water.
  • Pour the vinegar/water mixture down the drain, along with the baking soda. The mixture will start to give bubbles and give a fizz which gives a positive sign about the functioning of things.
  • The drain should be covered to allow the mixture to combine well with vinegar and baking soda.
  • Put on the timer for 10 minutes to work on the clogged bathtub drain.
  • Pour another cup of boiled water down your drain to flush out the remaining bathtub drain clog.
See also  How To Use A Rotary Tool? A Useful Go-To Guide For Home DIYers

You’ve completed the preceding procedures and may now inspect your drain. Check whether water is still accumulating in your bathtub not draining, by running water. Congratulations if this therapy was successful! You performed an excellent job of repairing your drain, and this procedure may be used to restore your kitchen sink, bathroom sinks, and any other drain-using equipment.

What can dissolve hair in a drain?

Hair clogs can be best treated and dissolved by using a combination of baking soda and vinegar. Since it is a natural home remedy, it prevents the damage that can be caused due to the usage of harsh chemicals. First, pour a cup of baking soda down the drain, wait for few minutes and then add a cup of vinegar.

Leave a Comment