How To Test Shocks By Hand – A Step by Step Guide

If your car’s shocks are worn out, they can make your ride uncomfortable and can even affect the handling of your vehicle. You may be wondering if there is a way to test shocks by hand to see if they need to be replaced. Luckily, there is a simple process that you can follow to test your shocks and see if they are in need of replacement.

Step 1: Park on a level (plain) surface

If you want to test your shocks by hand, the first step is to park your car on a level surface. This will ensure that your car is not biased in any way, and that the shocks are evenly balanced. Once you have parked, turn off your engine and set the parking brake.

Step 2: Inspect the balance of the shocks

When inspecting the balance of your shocks, you will want to look for any signs of uneven wear. Uneven wear can be caused by a number of factors, including improper installation, incorrect shocks for your vehicle, or even just normal wear and tear. If you notice any uneven wear, it is important to have your shocks checked by a professional to ensure that they are still safe to use.

Step 3: Push the shocks downard

When testing shocks, it is important to push them downard in order to get an accurate reading. To do this, simply place your hand on the top of the shock and push down. You should feel the shock compress and then rebound back up. If the shock does not rebound, then it is likely damaged and will need to be replaced.

See also  Service StabiliTrak Light Error Messages: Meaning, Causes and Fixes


Q: What is the best way to test shocks by hand?

A: The best way to test shocks by hand is to use a shock dyno. This device will allow you to measure the force required to compress and decompress the shock, as well as the amount of travel the shock has.

Q: Why is it important to test shocks by hand?

A: It is important to test shocks by hand because it allows you to ensure that the shocks are functioning properly. By testing the shocks, you can verify that they are able to adequately absorb and dissipate energy, which is crucial for safe operation.

Q: What are some common problems with shocks?

A: Some common problems with shocks include leaks, worn bushings, and damaged valves. These problems can cause the shocks to lose their ability to effectively absorb and dissipate energy, which can lead to unsafe operation.

How To Test Shocks By Hand – A Step by Step Guide

Must Read

1. How To Test Shocks By Hand – A Step by Step Guide

If you’re looking to test your car’s shocks by hand, there are a few things you’ll need to keep in mind. First, make sure the car is on level ground and in neutral. Next, locate the shock absorber and firmly press down on it. If the shock is in good condition, it should be able to return to its original position quickly. If it doesn’t, or if it feels spongy when you press it, the shock may need to be replaced.


Thanks for reading! I hope this guide was helpful in showing you how to test shocks by hand. Stay tuned for more car maintenance tips and tricks. Drive safe!

See also  10 Best Way to Heat Your Garage During Winter

Leave a Comment