How To Remove Pop Rivets

Rivets are stable fasteners that are usually used to bind straps, gutters, and other parts of light metal. Taking out the rivets is quite hard, but a few small tactics make it a doddle!

Are you seeking guidance for removing rivets without a drill? I assure you this article will provide you more information about the rivet removal tool.

This article provides you information about how to remove and replace rivets without a drill.

Components required

  • Screw gutter


Pop rivets are one of the widely used types of rivets in building construction. It is designed to be stable and it does not have a convenient way of inversion. Eg: Hexes, flat-headed slots, spiral threads, or Phillips, etc.

In fact, you can disable the rivets only by ruining them. The simplest method is to perform by using the “drilling” machine. It is easy to cut off the inside wall of the fastener, and eliminate the shaft from the head.

I continuously suggest titanium drill bits perform this. They are sturdy and intense for a longer period. It is sufficient to cut non-ferrous alloys and wood. If the rivets are excluded you can substitute them by “cutting screws”. You can use a gutter screw as a rivet removal tool. Generally, short fasteners are used to screw right to the gaps left by the rivet.

Steps to take out rivets

Here are some of the steps carried out to remove the rivets without a drill.

Step 1. Place all suitable rivet

The most commonly used rivet is “Pop Rivets”. It performs bind straps, gutters, and other parts of light metal on the outside of the homes. They are usually fitted in multiples to manage the elements from swinging.

See also  H4 Vs. 9003: What’s the Difference?

When you need to exclude a downspout or a gutter, you usually want to exclude two or three rivets.

Investigate the field from various sides and evaluate the number of rivets and the role each rivet performs. Several numbers of parts are riveted to be a few meters away from the ground, usually close to the roofline or fascia.

Ensure a secure spot to lean the ladder. Place it well-grounded from the ground. Be cautious while you are working on the ground.

Step 2. Choose a suitable drill bit

Pop Rivets has a tiny opening in the core. The hole defines the density and size of the drill bit which will be needed to exclude the rivet.

Just choose a drill bit and retain the point towards the hole of the rivet. When the bit is small to moves through the holes, you can use ⅛”. It is an ideal size that fits all.

Dump the bit in your electric drill and ensure it’s safe.

Step 3. Drill out the rivet

Cautiously locate the peak of the drill bit in the center of the hole. Retaining the device diagonal to the fastener and start drilling.

Drilling the metal is heavier pressure when compared to speed. Sustain a low-speed at the firm pressure. Ensure you are not splitting the bit! 1/8′′ bits are pretty thin. You should not squeeze hard and ensure the drill is bent.

You can recognize a new low sound from the fastener after 5-10 sec. Dig the wall of the metal. Return some pressure to restrict the bit from jabbing with huge force.

See also  Tom Ogle Engine – All that You Need to Know

If the rivet head splits the wall, then the bit hit the fastener heavily. You have a small hole drilled to fit the rivet. Drill out some suitable rivets, and cut the parts.

Step 4. Reattach with screw gutter

Few removals will be stable and you should not require elements for removing. You’ll want to re-attach a few pieces. When you have a pop rivet, you line up the

traditional components and fix a new rivet.

The maximum number of people are not having riveters. It performs the process quickly. So, you can fastly reconnect the parts with the screw gutter.

The screws are available in different colors. The most commonly used color is brown and white. The size is more compact and does not create any obstacles in downspouts and the gutters. For installation, you can line up the existing holes.

Use one hand to clamp the parts and another hand to inject the peak of the gutter screws. With the help of two elements, you can fix the screw. The two elements are 11-in-1 and 6-in-1screwdriver.

You can also use a flat-head, nut driver, Phillips, or other options as needed. Ensure the elements evolving concurrently. The fibers of the fastener cut the thin metal walls and lock them.


When you cannot line up the existing holes, new drills are used to cut the rivet. In certain cases, mild pressure is sufficient to alter the screw gutter. You can also take out rivets without a drill.

If you placed it correctly, you should not want to replace it. Screw gutter blend is a smooth flush rivet!

See also  An Ultimate Guide on Service Agreement Program – SAP

I hope this article can provide you more information about how to remove rivets without a drill.

Leave a Comment