How To Install Crown Molding On Cabinets

Kitchen cabinet crown molding has become a popular final touch on the kitchen cabinets.  However, many people do not understand what they should do, when it comes to installing the cabinets.  This is why they get the professional in order to install the cabinets for them.

The experts will add the extra piece of the wood on top of a cabinetry and they will nail a crown over it. It will hide the wood and it will let the crown shine in the entire glory.

In case you know how to use the hammer and you can design something for you, you should try installing crown molding on kitchen cabinets yourself.  The problem will be, if you don’t have enough space on a front of a cabinet where you may nail a crown molding.

You can use a simple solution, but it will not be the easy fix as the kitchen designer may tell you.  The kitchen crown molding is the visual flourish which will turn the standard cabinet into the integrated and gorgeous cabinets. Even if cutting may look as a daunting process, you will have to learn about measuring and mitering of the molding which will help you to work smoothly.  There are some simple techniques that can be used in order to create the fine and matching corner piece that will take the cutting of the crown to another level.

How To Install Crown Molding On Cabinets

How do you attach crown molding to cabinets?

 Installing crown molding will start by cutting. Use the tape measure in order to find the length of a cabinet side. Use tape measure to know every area where you want to add the crown molding on.  Measure everything precisely so that you will not cut the pieces which may be too short or too long.

Use the sliding bevel in order to find an angle at the outside corner:  put an inside edge for the tightening nut of the bevel over the corner of your cabinet.  Adjust a handle with the blade so that they can flush against every cabinet side.  You can tighten a nut over the bevel and hold the measurement in its right place.  You have to use a protractor in order to get the right angle.

Use the sliding bevel to measure an angle of the inside corner: place a handle of bevel flush against the connecting side of the angle. You can adjust the blade of the bevel up to the time that it will flush at another side. Ensure that the tightening nut will be nestled over an angle on its own; you can then screw it so that you can secure measurement.  It is possible to use a protector in for converting the angle in the specific degree.

  • Even if the free standing cabinets may not have the inside corners, the method will be useful if you want the molding to be wall mounted over t-shaped cabinets.

What it is the esiest way to install crown molding?

To add the crown molding for cabinets, you should start by cutting the strips of the 5/4 inch wood in the width and length of the size of the overlay cabinet.  Such strips can act like the nailing blocks. You should make the rabbet cut in the piece to make sure that they will fit snugly at the top of a cabinet.

Spray the paint to the fillers:  when you finish with the rabbet cut, you can spray the paint to the filler woods to ensure that they look the same as the kitchen cabinets.

Add every filler piece of a top of a cabinet.  In order to ensure that you can do this carefully, you need to use the super glue which will hold the filler pieces in their place over the cabinet.  You may also use the glue that will be specially made in order to foster the permanent bond found between the cabinet and the fillers.

Start by crown molding at the side of an overlay cabinet and ensure that the fillers pieces are fitted tightly over a wall.  You can use the pencil in order to make dimension at the inside and start cutting crown molding for cabinets. Make an arrow when keeping the correct measurement and this will help in identifying the right angle where the miter should cut.

Hold the cabinets with crown molding and ensure that it is pressing safely within the miter saw.  You may use the polyurethane glue with small wood pieces at the base of a miter saw so that the crown will not slip off.  You can then turn a miter saw at 45 degree and then cut the crown molding.

How do you attach crown molding to full overlay cabinets?

When you finish with the cutting of the pieces of the crown molding on top of kitchen cabinets, you should nail them over wood filler which is attached on the cabinets already.  You can grab the nail gun and try to fix everything together.   Do this process for each overlay cabinets that have the outside corners. After installing the kitchen cabinets with crown molding, you should also think about caulking with filling. When you have finished with the installation of the crown molding, you should fill out the hole using wood putty. You can use the caulk over the crown molding and this is where it will be attached over the ceiling to achieve to the finished look.

How do you cut the corners on crown molding for kitchen cabinets?

Before installing crown molding on kitchen cabinets, you should remember to use the power miter saw since it can easily cut the angles of the crown molding.  The saw is adjusted and it will cut at a certain angle.  The saw may cut at 45 degree towards the left and then 45 towards the right.

The angle of the molding is gotten by the use of the protractor.   To cut, you need to put the crown molding piece within the jig and a bed of a saw so that you may cut with the right corner.

Leave a Comment